Wall Mounted TekStrap™

$82.50

The TekStrap™ fastening system is designed to secure counter top laboratory instruments while allowing for quick and easy movement of the item for service and relocation. 

Installation Instructions:

  1. Locate position on counter top or backsplash where item will be located and clean the surface.
  2. Remove backing from mounting plate and secure to either counter top or back-splash, depending on heightof item and counter top.
  3. Locate desired points on theside of item to which adhesiveclip plates will be adhered. If fastening a painted item, simply clean surface with alcohol and allow to dry for five minutes. If fastening a Stainless steel item first scrub the surface where plates will be adhered using alcohol and a Scotch-BriteTM type scrub. Dust with a clean cloth and rub the area with the alcohol pads; allow to dry for five minutes.
  4. Peel off release paper from back of plate and press firmly into place.
  5. Adjust straps to allow a little slack in the tension.

*NOTE: Do not put tension on straps until adhesive has reached the recommended 72 hour cure time.

Full Description
Color Choose a color *
Length *

The TekStrap™ fastening system is designed to secure counter top laboratory instruments while allowing for quick and easy movement of the item for service and relocation. 

Installation Instructions:

  1. Locate position on counter top or backsplash where item will be located and clean the surface.
  2. Remove backing from mounting plate and secure to either counter top or back-splash, depending on heightof item and counter top.
  3. Locate desired points on theside of item to which adhesiveclip plates will be adhered. If fastening a painted item, simply clean surface with alcohol and allow to dry for five minutes. If fastening a Stainless steel item first scrub the surface where plates will be adhered using alcohol and a Scotch-BriteTM type scrub. Dust with a clean cloth and rub the area with the alcohol pads; allow to dry for five minutes.
  4. Peel off release paper from back of plate and press firmly into place.
  5. Adjust straps to allow a little slack in the tension.

*NOTE: Do not put tension on straps until adhesive has reached the recommended 72 hour cure time.

Current Stock:
Weight: 1.20 LBS
Width: 8.00
Height: 10.00
Depth: 2.00

Customer Reviews 0 (0 Reviews) Write a Review

Sorry, there are no reviews for this product yet.